Turntable Section

Drive System: Belt drive

Motor: DC motor

Selectable Speeds: 33? and 45 rpm

Motor Servo: Speed rotation and servo system

Rotation Speed Variation: +/-1%

Wow and Flutter: 1%

Signal-to-Noise Ratio: -67 dB or higher (A-weighted) -60 dB or higher (unweighted)

Platter: Aluminum die-cast

Platter Diameter: 0 in / 300 mm

Tonearm Section

Type: Aluminum tube, static-balanced

Effective Arm Length: 8 in / 223.6 mm

Stylus Pressure Range: 0 to 0 g

Cartridge Weight Range: 5 to 6.0 g

Effective Arm Mass: 4 g

Overhang: 6 mm

Offset Angle: 25 degrees

Anti-Skating: Adjustment Supported

Main Bearing: Stainless steel

Cartridge Section:

–

Type: Audio-Technica AT91 moving magnet

Stylus Construction: Bonded diamond

Mount: Half-inch

Frequency Response: 20 Hz to 20 kHz

Channel Separation: >18 dB

Channel Balance: 5 dB

Vertical Tracking: Angle 20 degrees

Stylus Pressure: 0 g +/-0.5 g

Cartridge Weight: 0 g +/-0.5 g

Headshell Weight: 0 g (including screws, nuts and wires)

Phono Equalizer Amplifier

–

Type :Moving magnet (MM)

Phono Output: 5 mV (1 kHz, 3.54 cm/sec)

Line Output: 140 mV (-17 dBV)

Phono/Line: Switchable

Supported Load Impedance: 47 kΩ

Connector: RCA pin jack including RCA cable accessories

Voltage: 100 to 240 V AC / 50 to 60 Hz

Power Consumption: 1.5 W (less than 0.5 W at standby)

Dimensions: (WXHXD) 140mm x 420mm x 360mm

Weight: 5.5 kg